Skip to content
EMV Tools

Tools

DOL decoder (PDOL, CDOL1, CDOL2, DDOL)

A Data Object List (DOL) is a list of tags and lengths, without values, that the card sends to ask the terminal for data. The PDOL comes in the application selection response; CDOL1, CDOL2, and DDOL come in card records.

Look at it when a GET PROCESSING OPTIONS or GENERATE AC command fails, or when you build the data a terminal must send: the terminal answers with the values concatenated in the same order and with the same lengths.

The result lists each requested tag with its name and length. Paste the data too to split it into one value per field.

Worked example: the CDOL1 in the card record example, 9F02 06 9F03 06 9F1A 02 95 05 5F2A 02 9A 03 9C 01 9F37 04, asks for the amount, the other amount, the terminal country, the TVR, the currency, the date, the transaction type, and the unpredictable number: 29 bytes in total.

New to EMV? Read EMV in 5 minutes or browse the glossary

Everything runs in your browser. Nothing you enter leaves this page.

Spaces, line breaks, colons, and the 0x prefix are ignored.

Paste the values the terminal sent to split them by field.

How to read it: a DOL lists tags and lengths only. The terminal answers with the values alone, in the same order and with the same lengths, without tags.

Requested data
TagNameLength
9F026
9F036
9F1A2
955
5F2A2
9A3
9C1
9F374

From a DOL to the data the terminal sends

From a DOL to the data the terminal sendsThe CDOL1 from the read record example lists 8 tags with their lengths. In GENERATE AC, the terminal sends only their values, one after another in the same order, 29 bytes in all.CDOL1: tag and length9F02669F03669F1A2295555F2A229A339C119F3744Data in GENERATE AC: 29 bytes

A DOL holds no values. The card lists the tags it needs and their lengths, and the terminal answers with the values alone, without tags or lengths, so each value is found by its position.