Skip to content
EMV Tools

Tools

CTQ decoder (9F6C)

The Card Transaction Qualifiers (CTQ, tag 9F6C) are two bytes that a Visa contactless card returns during a contactless (qVSDC) transaction to tell the reader how it wants the transaction handled.

Look at it when a contactless payment asks for a PIN or a signature unexpectedly, goes online, or asks the cardholder to use the contact chip instead.

Each set bit is a request from the card: whether it wants an online PIN or a signature, when the reader should go online or switch to the contact chip, and whether the cardholder was already verified on the device (CDCVM).

Worked example: 80 00 sets only byte 1, bit 8: online PIN required.

New to EMV? Read EMV in 5 minutes or browse the glossary

Everything runs in your browser. Nothing you enter leaves this page.

Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.

Hex value: 0000

How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.

Byte 1: 00
BitStateMeaning
b8
b7
b6
b5
b4
b3
b2
b1
Byte 2: 00
BitStateMeaning
b8
b7
b6
b5
b4
b3
b2
b1

How bits are numbered

How bits are numberedA value of 2 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.Hexb880b740b620b510b408b304b202b101Byte 1Byte 2
A value of 2 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.