Additional terminal capabilities decoder (9F40)
Additional Terminal Capabilities (tag 9F40) are five bytes that list the transaction types the terminal supports, its data input and output functions, and the code tables it can print or display. They come from the terminal configuration.
Look at it when you check or build a terminal profile, for example during terminal certification.
Bytes 1 and 2 list transaction types, byte 3 data input keys, byte 4 output functions, and byte 5 code tables. Each set bit is a supported function.
Worked example: 60 00 F0 A0 01 is a terminal for goods and services, with numeric, alphabetic, command, and function keys, a printer and a display for the attendant, and code table 1.
New to EMV? Read EMV in 5 minutes or browse the glossary
Everything runs in your browser. Nothing you enter leaves this page.
Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.
Hex value: 0000000000
How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |