Skip to content
EMV Tools

Tools

Terminal type decoder (9F35)

The Terminal Type (tag 9F35) is one byte written as two digits. It comes from the terminal configuration, and the terminal sends it in DE 55.

Look at it when card or issuer rules depend on the kind of terminal, such as unattended terminals or terminals that work only offline.

The first digit says who operates the terminal: a financial institution, a merchant, or the cardholder. The second says whether it is attended and whether it works online only, offline with online capability, or offline only.

Worked example: 22 from the terminal data example is a merchant terminal, attended, offline with online capability.

New to EMV? Read EMV in 5 minutes or browse the glossary

Everything runs in your browser. Nothing you enter leaves this page.

Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.

Hex value: 00

Warning: Byte 1 holds a value that is reserved or unknown.

How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.

Byte 1: 00
BitStateMeaning
b8
b7
b6
b5
b4
b3
b2
b1

Multi-bit fields

  • Byte 1, mask FF: value 00 — Reserved or unknown value

How bits are numbered

How bits are numberedA value of 1 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.Hexb880b740b620b510b408b304b202b101Byte 1
A value of 1 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.