Skip to content
EMV Tools

Tools

CVM Results decoder (9F34)

CVM Results (tag 9F34) are three bytes the terminal writes after cardholder verification. The terminal sends them to the issuer in DE 55.

Look at it to know how the cardholder was actually verified, for example when you compare it with the CVM List (8E) or with the TVR.

Byte 1 is the method the terminal performed, byte 2 the condition of the rule it used, and byte 3 the result: successful, failed, or unknown.

Worked example: 1F 00 02 from the terminal data example means no CVM required, under the condition always, with a successful result.

New to EMV? Read EMV in 5 minutes or browse the glossary

Everything runs in your browser. Nothing you enter leaves this page.

Spaces, line breaks, colons, and the 0x prefix are ignored.

How to read it: the method is what the terminal did, the condition is the CVM List (8E) rule it used, and the result says whether the verification worked.

Method
No CVM required
If it fails
Cardholder verification fails
Condition
Always
Result
Successful

Anatomy of the CVM Results

Anatomy of the CVM ResultsThe CVM Results from the terminal data example, three bytes: byte 1 is the method that was performed, byte 2 is the condition of the rule that was used, and byte 3 is the result: 00 unknown, 01 failed, or 02 successful.1FMethod00Condition02Result
Method (1F)
No CVM required
Condition (00)
Always
Result (02)
Successful