AUC decoder (9F07)
The Application Usage Control (AUC, tag 9F07) is two bytes set by the issuer that say where and how the card may be used: domestically or abroad, for cash, goods, services, or cashback, and at ATMs or other terminals. The terminal reads it from a card record.
Look at it when the TVR says the requested service is not allowed for the card product: the terminal sets that bit when the AUC does not allow the transaction.
Each set bit is a use the issuer allows; a clear bit is a use the card does not allow.
Worked example: the card record example holds 9F07 02 FF00. Byte 1 allows cash, goods, and services, both domestic and international, at ATMs and at other terminals; byte 2 is 00, so domestic and international cashback are not allowed.
New to EMV? Read EMV in 5 minutes or browse the glossary
Everything runs in your browser. Nothing you enter leaves this page.
Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.
Hex value: 0000
How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |