Skip to content
EMV Tools

Tools

TSI decoder (9B)

The Transaction Status Information (TSI, tag 9B) is two bytes in which the terminal records which steps of the transaction it performed, such as offline data authentication, cardholder verification, or card risk management. It appears in terminal logs and traces.

Read it together with the TVR: a step missing here explains many TVR bits, such as one that says offline data authentication was not performed.

Each set bit is a step the terminal performed; a clear bit is a step it skipped or did not reach.

Worked example: E8 00 says offline data authentication, cardholder verification, card risk management, and terminal risk management were performed.

New to EMV? Read EMV in 5 minutes or browse the glossary

Everything runs in your browser. Nothing you enter leaves this page.

Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.

Hex value: 0000

How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.

Byte 1: 00
BitStateMeaning
b8
b7
b6
b5
b4
b3
b2
b1
Byte 2: 00
BitStateMeaning
b8
b7
b6
b5
b4
b3
b2
b1

How bits are numbered

How bits are numberedA value of 2 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.Hexb880b740b620b510b408b304b202b101Byte 1Byte 2
A value of 2 bytes. Bytes are counted from the left, starting at byte 1. Inside each byte, bits go from b8 on the left to b1 on the right: b8 is the most significant bit, worth 80 in hex, and b1 is the least significant, worth 01.