TVR decoder (95)
The Terminal Verification Results (TVR, tag 95) are five bytes the terminal fills while it processes a chip transaction. The terminal uses them to decide whether to approve offline, go online, or decline, and sends them to the issuer in DE 55.
It is the first value to read when a transaction is declined or goes online unexpectedly: each set bit records a check that failed or a step that did not run.
The result lists the five bytes bit by bit. Each set bit is a finding, with a note on what usually causes it; all zeros means no check failed. You can also toggle bits to build the value you expect.
Worked example: the TVR 80 00 00 00 00 from the terminal data example has only byte 1, bit 8 set: offline data authentication was not performed. The note tells you to check that the AIP (82) announces an authentication method the terminal supports in 9F33.
New to EMV? Read EMV in 5 minutes or browse the glossary
Everything runs in your browser. Nothing you enter leaves this page.
Spaces, line breaks, colons, and the 0x prefix are ignored. Toggle the bits to build a value; the hex updates as you go.
Hex value: 0000000000
How to read it: bytes are numbered from 1 on the left, and bits from 8 (the leftmost) to 1 (the rightmost). A set bit is 1. Bits reserved for future use (RFU) should be 0.
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |
| Bit | State | Meaning |
|---|---|---|
| b8 | ||
| b7 | ||
| b6 | ||
| b5 | ||
| b4 | ||
| b3 | ||
| b2 | ||
| b1 |